With Loopy Pro
Let the looper decide when the drummer plays
When you build a song out of loops, the drums have a job that is easy to describe and fiddly to get right: come in when you are ready for them, keep going while the layers stack up, and drop out exactly when the song does. Pop Drummer has three pieces of MIDI behaviour aimed at that, and none of them needs anything unusual from Loopy Pro. This page puts them together.
Three ways a drummer starts by accident
Close each door before the gig
A repeated message flips the transport
PLAY/STOP is a toggle, so a looper that repeats it on each cycle will eventually stop Pop Drummer in the middle of a chorus. Four other rows carry a state instead of flipping it. START is ignored while the drummer is playing, STOP is ignored while it is silent, and their fill versions behave the same way: FILL START enters with a lead-in fill, FILL STOP rounds the song off with a closing fill before it halts. One detail matters on stage. Sending STOP while that closing fill is still running cuts the drummer at once rather than letting the fill finish, which is handy when the loops end a beat early.
The host starts, and the plugin goes with it
Inside a host, Pop Drummer normally plays whenever the host transport rolls. The play padlock beside its Play button changes that: closed, the drummer stays quiet when the host starts and waits for you to bring it in. Two MIDI rows close and open it, PLAY LOCK ON and PLAY LOCK OFF, and they exist in the plugin alone, since the standalone app has no host transport to hold against. They do not start or stop anything themselves. They decide what happens at the next host start, and a message that reaches the plugin at the same instant the host starts already counts for that start.
A fill request wakes a stopped drummer
The plain FILL row, sent while Pop Drummer is stopped, starts it with a fill. That is useful on a footswitch and awkward when a looper fires fills on a schedule. Turn on MIDI FILL only while playing in Settings, under FILLS, and FILL from MIDI is ignored while the drummer is stopped, while still playing a fill whenever it is running. The FILL button on screen keeps working as before. The setting is shared between the app and the plugin, and the plugin has its own gear button to reach it.
Default notes
The rows a looper needs
| Row | Default | What it does |
|---|---|---|
| START | E3 | Starts if stopped, otherwise nothing |
| STOP | F3 | Stops if playing, otherwise nothing |
| FILL START | F#3 | Starts with a lead-in fill |
| FILL STOP | G3 | Closing fill, then stop |
| PLAY LOCK ON | G#3 | Plugin waits at the next host start |
| PLAY LOCK OFF | A3 | Plugin follows the next host start |
| LOAD SET / SONG # | CC 33 | Loads the set at that position, from zero |
Note names use the default octave reference, where note 60 reads C3. If one of these notes was already bound to another row in your map, that row keeps it and the new row waits for a note of its own.
On the Loopy Pro side
Messages that fire themselves
Loopy Pro hosts Pop Drummer as an Audio Unit instrument and routes MIDI to it as it does for other plugins. What makes the setup above work is its Send MIDI Message action, which you can put on a widget or attach as a Follow Action to events such as Start Clock, Stop Clock, Play Clip or Load Project. Point those messages at Pop Drummer and the looper does the remembering for you.
A pattern that suits a looped set: a Follow Action on Load Project sends PLAY LOCK ON, so loading the next song does not set the drums going on its own. When the loops are ready, a widget sends START, or FILL START if you want the kit to arrive with a flourish. A widget for the ending sends FILL STOP and the drummer plays itself out. Because each of those rows ignores a message that matches the current state, a double tap or a repeated cue changes nothing.
From one song to the next
Call up a song's pads by number
If each song in your set has its own Live Pad Set, one controller message can load it. LOAD SET / SONG # reads the value you send as a position in the list, counting from zero, so value 2 brings up the third set. The number is printed in the corner of each set's button in the LOAD window, and dragging sets into a new order renumbers them, so arrange the list before you program the cues. A value beyond the end of the list does nothing. In Song Mode the same row loads Songs by their position in the Song list instead.
Loading a set this way fills the pads without changing the groove that is playing; the change is heard when you press a pad. Whether the set also brings its drum kit depends on the LOAD SOUNDS switch in the LOAD window, which ships off. Tempo stays with the host. More on building sets is on the Drummers & Jam page and in the manual.
Troubleshooting
If something is off
PLAY LOCK ON seems to do nothing. It acts at the next host start, so it changes nothing you can hear while the transport is already rolling. Check too that the row has a note of its own, and that you are in the plugin: the standalone app does not list it.
The drummer starts when a fill cue arrives. Switch on MIDI FILL only while playing. After that, the MIDI controls that can start Pop Drummer are START, PLAY/STOP, FILL START and FILL ►.
Alternate presses of a widget do nothing. A widget sending CC in toggle mode sends 0 on its second press, and Pop Drummer reads 0 on a button row as a release. Set the widget to momentary. The rest of the MIDI setup is on the MIDI map page.
Free to try, 7-day trial. Get Pop Drummer
Find the feel your song is asking for
Download Pop Drummer and try it free for 7 days, in every bank.
Free to try, 7-day trial. One purchase unlocks the full version, no subscription.
More from Lumbeat
A band that passes ideas around
Grooves, Live Pad Sets and Songs you make in Pop Drummer can travel to these apps, and theirs to Pop Drummer.